复合材料管道连接件真空辅助成型工艺树脂流动研究

对采用真空辅助树脂传递模塑成型工艺(VARTM)制造复合材料管道连接件的树脂流动过程进行分析,考虑树脂注模工况下的注射口和出射口位置,采用有限元/控制体积方法分别模拟了4种可能树脂注模方式所需工艺时间和树脂流动前锋形状,并确定了合适的注模方式。模拟结果表明:与点注射的树脂注模方式相比,线注射方式可以得到更均匀的树脂流动前锋;进而采用线注射-线出射树脂注模方式能够有效浸润织物。采用模拟所得注模方式开展了VARTM工艺试验,制造了复合材料管道连接件缩比件和整体连接件筒构件,所得试验结果与数值模拟结果一致,验证了模拟结果的可靠性。     

长杆弹侵彻新型复合装甲数值仿真及研究

应用有限元计算程序AUTODYN模拟了由爆炸反应装甲和陶瓷复合装甲组成的新型复合装甲在长杆弹斜侵彻作用下的侵彻过程。根据长杆弹与爆炸反应装甲和陶瓷复合装甲的作用现象,研究了长杆弹对新型复合装甲的侵彻机理以及两者在各时刻的作用规律。所得结论对进行其他复合装甲抗长杆弹侵彻的研究具有一定的参考价值。     

Performance of a small and low-cost chamber to simulate lunar surface environment

The performance of a small and low-cost metal chamber built to simulate the pressure and temperature conditions of lunar surface was assessed and the results are presented. This chamber is intended for studying the physical properties of lunar surface and subsurface (using soil simulants) and also to validate the technology readiness of certain newly developed payloads planned for future lunar surface missions (Lander/Rover). It is possible to reach down to ∼10⁻⁷ Pa under specific conditions and maintain the temperature of the sample under investigation to lunar day and night temperatures. The designed system has been subjected to various tests to evaluate its performance and suitability for carrying out experiments in a simulated lunar environment.     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

幂律型流体撞击射流破碎特性直接数值模拟

凝胶推进剂的双股射流撞击雾化广泛应用于液体火箭发动机的燃烧室中,其破碎特征及雾化效果直接影响燃烧效率。为探究雾化特性的发展规律,采用直接数值模拟DNS方法,对射流速度为100m/s的剪切稀化非牛顿液体正交撞击产生的雾化特征、液体表面积、表面波、涡特性以及非牛顿特性开展研究。结果表明,射流下形成的雾化流场迅速扩张形成液膜,液膜两侧边缘破碎成大量的液丝与液滴,核心部分产生撞击波后在气体力的作用下逐步发展为带有凸起和褶皱的不稳定表面波,其撞击波波长最大可达2.46倍射流直径。液体表面积不断增长,但无量纲表面积总体呈现先下降再上升的趋势。气体中的涡量分布则分为有序附着区和无序爆炸区两类,并且涡量主要集中分布于气相区域。此外,射流撞击时产生强剪切使该液体内部的粘性系数下降,最低仅为初始粘性系数的0.3倍。     

复杂结构的非线性检测

由于非线性系统的复杂性，现有的各种非线性检测方法都有局限性。从频域、幅域和时域三方面综合考察复杂结构的非线性表现，采用六种方法进行非线性检测，给出一个综合描述系统非线性程度的指标－非线性因子。鉴于非线性系统表现出的非线性强弱与系统所受的激励有直接的关系，将非线性因子定义为与激励的幅值特性和频率特性相关的系数指标。对几种典型非线性系统的仿真模型进行了检测，以验证非线性因子的有效性。     

HB-3000型布氏硬度计换向系统的改造

介绍了ＨＢ－３０００型布氏硬度计换向系统的改造方法及改造后硬度计的工作程序，并就改进效果进行了论述。     

自然通风和蒸发冷却在新疆建筑应用的数值分析

为了使新疆和田地区夏季在经济性合理前提下使室内通风环境满足人体热舒适要求。利用蒸发冷却技术将室外空气处理后送入室内，通过数值模拟分析得出在夏季室内负荷最大时刻采用机械辅助式自然通风，使得室温能够雏持在26-8℃，风速为0．6m/s，基本满足人体热舒适要求。在室外温度适宜的过渡季节采用Trombe墙和太阳能烟囱复合的自然通风系统，建筑太阳能烟囱的经济高度为10m。     

槽对超声速混压式进气道性能及附面层的影响

为了提高定几何超 声速混压式轴对称进气道的性能，应用在进气道不同位置开槽的方法 ，研究了在各级锥体上、锥体的折角处开槽时锥体上的附面层变化；研究了多工况下开槽对进气道的总压恢复系数、流量系数、冲压比和起动性能产生的影响。结果表明开槽将改变超声速进气道头锥上的波系分布，使槽后附面层厚度增加。折角处开槽槽后附面层厚度比原型进气道增加16.7%，锥体上开槽比原型进气道增加33.3%。开槽使高马赫数下的总压恢复系数有所增加，其增加量随来流马赫数的变化而变化。在马赫数为4.0的设计状态下，折角处开槽可使进气道的总压恢复系数提高1.8%，锥体上开槽可以提高4.3%。之外，锥体折角处开槽对流量系数影响不大，还可以改善进气道的起动性能，降低起动马赫数。